Meggitt (Sensorex) offers a wide range of Intrinsically Safe (IS) LVDT & RVDT sensors, signal conditioners and inertial systems, ATEX certified, for explosive atmosphere applications.
Introduction to ATEX regulations
The European directive applied by Meggitt (Sensorex) is the 94/9/CE directive for equipments which are intended for ATEX zone applications.
These ATEX zones are subdivided into 6 specific zones, dependent on the product exposure degree to gaseous or dusty atmosphere:
- Zone 0 : permanent presence of the explosive gaseous atmosphere (> 1000h / year)
- Zone 1 : occasional presence of the explosive gaseous atmosphere (10h<x<1000h / year)
- Zone 2 : rare presence of the explosive gaseous atmosphere (< 10h / year)
- Zone 20 : permanent presence of the explosive dusty atmosphere (> 1000h / year)
- Zone 21 : occasional presence of the explosive dusty atmosphere (10h<x<1000h / year)
- Zone 22 : rare presence of the explosive dusty atmosphere (< 10h / year)
Marking specifying equipment conformity is broken down into three parts:
- First part indicates the using place (II for surface industries)
- The second part indicates the category (1 for devices used in 0/20 zones, 2 for devices used in 1/21 zones and 3 for devices used in 2/22 zones)
- The third part indicates the zone type (G for gaseous zones (0,1,2), D for dusty zones (20,21,22))
Meggitt (Sensorex) intrinsically safe products have an additional marking enabling the protection mode identification:
- The first part confirms that the device is in accordance with the European standard (Ex code corresponds to the explosive protection standard)
- The second part is made up of « ib » or « ia » letters, for the intrinsically safe. Meggitt (Sensorex) devices are “ia” qualified (type a intrinsically safe)
- The third part indicates the gas group :
I = methane
IIA= propane
IIB= ethylene
IIC= dihydrogen and acetylene
Note: Meggitt (Sensorex) products are not qualified for gas I group as this is not applicable for surface industries.
- The fourth part is the maximal surface temperature :
T1= 450°C
T2= 300°C
T3= 200°C
T4= 135°C
T5= 100°C
T6= 85°C
Meggitt (Sensorex) intrinsically safe products
- LVDT sensors, 12mm diameter and cable output
- Rugged LVDT sensors, with swivel joints
- RVDT sensors, 36mm diameter
- Signal conditioners for LVDT and RVDT sensors
- Inclinometers and accelerometers